How to Install Tile Shower Walls as a DIYer

Why Should You Install Shower Walls on Your Own?

Taking on a DIY shower wall installation offers many benefits beyond just saving money. By installing the walls yourself, you have full control over the design, materials, and the final look, ensuring it fits your personal style.

DIY projects give you a sense of accomplishment and allow you to learn new skills along the way. With the right tools and guidance, you’ll enjoy the satisfaction of a job well done and add significant value to your home without the high costs of hiring a professional.

Step 1: Setting the Stage for Success

Installing tile shower walls can seem like a big task, but it becomes much more manageable with proper preparation. Let’s walk through the essential steps to get you ready for a smooth and stress-free installation.

Measure and Plan Your Layout

Before laying down a single tile, you’ll need to carefully measure your shower space. This will help you figure out how many tiles you’ll need and how they’ll be arranged. Take into account any tricky areas like corners, shelves, or niches. A quick sketch of the tile layout can help you visualize the placement and ensure you avoid awkward cuts or uneven spacing.

Surface Preparation

A clean and level surface is key to a successful tile job. Start by ensuring your shower walls are free of dirt, grime, or old adhesive. If your existing surface isn’t suitable for tiling (like drywall or old tile), consider installing a cement backer board for a sturdy, moisture-resistant base. This step ensures the longevity of your tile installation and keeping everything securely in place.

Gather Your Materials and Tools

Before you begin installing tile shower walls, make sure you have all the materials and tools you’ll need. This includes:

Tiles (of course!)
Tile adhesive (thin-set mortar)
Grout
Tile spacers for even spacing
Notched trowel for spreading adhesive
Tile cutter or wet saw for precise cuts
Level to ensure everything lines up correctly

Step 2: Apply the Waterproofing Membrane

Waterproofing ensures your tile shower lasts and stays leak-free. Installing a waterproof membrane creates a barrier that keeps moisture from seeping behind your tiles and causing damage over time. Here’s how to apply it properly.

Installing the Membrane

Start by cutting your waterproofing membrane (whether it’s a roll-on, sheet, or liquid type) to fit your shower wall s. Make sure it covers every surface that will be exposed to water. Using a notched trowel or a roller, apply the recommended adhesive or primer to the surface, then press the membrane firmly against the walls. Smooth it out to remove any air bubbles or wrinkles. Work in sections, ensuring full coverage.

Sealing the Corners and Edges

Corners and edges are the most vulnerable areas for water leaks, so pay special attention to sealing them properly. Use waterproofing tape or additional membrane strips along all corners, seams, and edges. Make sure to overlap these areas slightly for extra protection. Seal around plumbing fixtures like the shower head, faucet, or valve, using the same membrane material or specialized seals to prevent water from sneaking through.

Drying Time

After the membrane is in place, give it enough time to fully dry before moving on to tile installation. This drying time can vary depending on the type of membrane you’re using, so always check the manufacturer’s instructions. Rushing this step can compromise the waterproof barrier, so be patient and ensure everything is fully set before continuing.

Step 3: Apply the Waterproofing Membrane

A well-applied waterproof membrane protects your shower walls from moisture damage. This step ensures that no water seeps through the tiles, which can lead to mold, mildew, or structural problems. Here’s how to properly install the membrane and seal those critical areas.

Installing the Waterproofing Membrane

Start by measuring and cutting the waterproof membrane to fit the walls of your shower. Whether you’re using a roll-on liquid or a sheet membrane, make sure it covers every surface that will come in contact with water. Depending on the product’s instructions, apply the membrane adhesive (or primer for liquid membranes) using a notched trowel or roller. Carefully press the membrane onto the wall, smoothing it out as you go to eliminate any air pockets or wrinkles. Work in manageable sections to ensure full coverage and a secure bond to the wall.

Sealing the Corners and Edges

Corners, seams, and edges are the most vulnerable spots for leaks, so it’s important to seal these areas thoroughly. Use waterproofing tape or additional strips of membrane to reinforce all corners, joints, and where the walls meet the floor. Apply the tape with a slight overlap to create a continuous barrier. Don’t forget to seal around any plumbing fixtures like shower heads or faucets using the proper seals or specialized waterproofing accessories to keep water out.

Allowing the Membrane to Dry

Once the membrane is fully applied, let it dry completely before proceeding to the next step. Drying times will vary depending on the product—typically, they range from 24 to 48 hours. Check the manufacturer’s guidelines and resist the temptation to rush the process. A properly dried membrane is the foundation of a leak-proof shower, so patience here will pay off in the long run.

Ready to upgrade your bathroom with beautiful tile shower walls? With the right tools and our step-by-step guide, you can transform your shower on your own without hiring a contractor. Visit our trusted retailers to get started today with FlexStone’s DIY-friendly products and make your dream bathroom a reality!

Learn More

Step 4: Mixing and Applying Thin-Set Mortar

Once your waterproofing membrane is installed and dried, it’s time to apply the thin-set mortar, which will bond your tiles to the wall. Here’s how to properly mix and apply thin-set mortar for a successful tile installation.

Mixing the Thin-Set Mortar

Start by following the manufacturer’s instructions on the bag of thin-set mortar. In a clean bucket, pour the recommended amount of water and slowly add the dry mortar mix while stirring. Using a drill with a mixing paddle, mix the mortar until you achieve a smooth, peanut butter-like consistency. Make sure there are no lumps. Let the mixture sit, or “slake,” for about 10 minutes to fully hydrate, then give it a quick final stir before applying. This ensures the mortar bonds properly and gives you enough time to work with it.

Applying the Thin-Set Mortar

Using a notched trowel, apply the thin-set mortar to the shower wall in small sections. Spread the mortar evenly, holding the trowel at a 45-degree angle to create ridges in the mortar. These ridges help the tile adhere more securely by allowing the mortar to fully bond to the back of the tile. Be sure not to apply too much mortar at once, as it can start to dry before you have a chance to set the tiles.

Working in Sections

It’s important to work in sections, applying thin-set mortar to small areas at a time—typically no more than 3×3 feet. This approach prevents the mortar from drying out before you’ve had a chance to lay the tiles. Start with the bottom row and work your way up, applying mortar and setting tiles one section at a time. Press each tile firmly into the mortar, slightly twisting it to ensure it adheres properly. Use tile spacers to maintain even gaps between tiles for grout.

Step 5: Setting the Tiles

Once your thin-set mortar is applied, it’s time to start installing the tiles for shower wall. Proper placement, spacing, and alignment yield a polished, professional look. Here’s how to do it step by step.

Starting at the Bottom Center

Begin by setting your first tile at the bottom center of the shower wall. This is your starting point, and it will serve as a guide for the rest of your tile installation. Working from the center helps ensure the tiles are evenly distributed across the space. Press the tile into the mortar and give it a slight twist to help it adhere securely. Use a level to check that the tile is perfectly straight before moving on.

Using Tile Spacers for Consistent Gaps

Place tile spacers between each tile as you set them to maintain even grout lines. These spacers ensure that the gaps between your tiles remain consistent, which is essential for a neat and uniform finish. As you move from tile to tile, check that they are level horizontally and vertically to avoid uneven rows or crooked tiles.

Cutting the Tiles to Fit

As you reach the edges of the wall or encounter obstacles like plumbing fixtures, you’ll likely need to cut some tiles to fit. Use a tile cutter or wet saw to make precise cuts. Measure the space carefully before cutting, and always double-check your measurements to avoid waste. When cutting around corners, edges, or pipes, take your time to ensure each piece fits snugly and smoothly into place.

Checking Alignment as You Go

As you work your way up the wall, continuously check the alignment of your tiles. Use a level and a straightedge to ensure the tiles are lined up correctly across the entire surface. Step back periodically to look at the overall layout, making sure everything is aligned and level. Correcting alignment issues early on will prevent bigger problems as you move forward.

Step 6: Grouting and Sealing

Once your tiles are set and the mortar has had time to cure, it’s time to grout and seal them to fully install your tile shower walls. These final steps enhance the appearance of your tiles and protect them from moisture and wear.

Applying the Grout

Start by mixing the grout according to the manufacturer’s instructions. Using a rubber grout float, apply the grout at a 45-degree angle to the tiles, pressing it into the spaces between the tiles. Work in small sections, spreading the grout evenly and making sure to fill all the gaps. Once the grout is applied, use the edge of the float to scrape off any excess, leaving the grout lines clean and smooth.

After you’ve filled all the gaps, allow the grout to set for about 10-15 minutes. Then, use a damp sponge to wipe away the grout haze on the tile surface, being careful not to disturb the grout lines. Rinse and wring out the sponge frequently, and continue wiping until the tiles are clean.

Sealing the Grout

Once the grout has fully cured, typically after 24-48 hours, it’s important to seal it to protect it from moisture, stains, and mold. Using a grout sealer and a small applicator brush, carefully apply the sealer along the grout lines. Be sure to cover every grout joint to ensure maximum protection. Allow the sealer to dry according to the product instructions, and apply a second coat if necessary for added durability.

Sealing the Edges and Corners

To ensure your shower is fully protected from water intrusion, apply silicone caulk around the edges of the shower and in the corners where the walls meet. This creates a flexible, waterproof seal that prevents water from penetrating these vulnerable areas. Run a bead of caulk along the edges and use a caulk tool or your finger to smooth it out for a clean finish.

Final Clean-Up

After sealing, give the shower one final wipe-down to remove any remaining grout haze or dust. Let everything cure completely before using the shower—this might take an additional 24 hours, depending on the grout and sealant you used.

Transform Your Bathroom With FlexStyle—Innovative Panels from FlexStone

FlexStyle from FlexStone brings the sophisticated look and texture of white tile to your bathroom, offering a stylish yet practical alternative to traditional tile walls. These full wall panels emulate the classic elegance of tile but are far easier to clean—no more hours spent scrubbing grout lines! FlexStyle gives you the timeless beauty of tile with a modern, low-maintenance twist.

Ready to explore your options? Our trusted retail partners—Home Depot, Lowe’s, Menards, and Wayfair—make it easy to find everything you need to complete your project.

How to Install Tile Shower Walls: A Step-by-Step Guide for DIYers

Why Should You Install Shower Walls on Your Own?

Step 1: Setting the Stage for Success

Measure and Plan Your Layout

Surface Preparation

Gather Your Materials and Tools

Step 2: Apply the Waterproofing Membrane

Installing the Membrane

Sealing the Corners and Edges

Drying Time

Step 3: Apply the Waterproofing Membrane

Installing the Waterproofing Membrane

Sealing the Corners and Edges

Allowing the Membrane to Dry

Step 4: Mixing and Applying Thin-Set Mortar

Mixing the Thin-Set Mortar

Applying the Thin-Set Mortar

Working in Sections

Step 5: Setting the Tiles

Starting at the Bottom Center

Using Tile Spacers for Consistent Gaps

Cutting the Tiles to Fit

Checking Alignment as You Go

Step 6: Grouting and Sealing

Applying the Grout

Sealing the Grout

Sealing the Edges and Corners

Final Clean-Up

Transform Your Bathroom With FlexStyle—Innovative Panels from FlexStone

Share This Post

More Like This

About Us

What We Do

Support

Contact Us